All Posts By

Gideon

Bridges Crypto

7 Ways To Bridge To The Linea Mainnet

With the latest launch of Consensys’ zero-knowledge Ethereum Virtual Machine (zkEVM) Layer-2 network, here are some of the ways you can send your funds over to Linea.

For a complete guide on bridging your funds, you can check out my video here:

Continue Reading

Airdrops Crypto

4 Steps To Complete The Linea Voyage Campaign (Bridge Week)

Last updated on May 7th, 2023

Linea has announced its Voyage campaign, which is similar to the previous Arbitrum Odyssey campaign.

NB tHldCFVpVYwJJB iGf

The best part is that Linea is still on the testnet, so every transaction done is free.

These end on 7th May, so do try to do them asap!

Step #1: Bridge BUSD and BNB to Linea on Celer

First, you’ll need to get testnet BNB from the faucet.

dLLdWVQ6BBLUoA3GGBoqE

You’ll need to get BUSD from the faucet on Celer, which requires testnet BNB (as gas fees) to claim these tokens.

uWI OWPQ90DyJR2WVco5B

After that, you can bridge both BNB and BUSD to Linea.

I found this step really troublesome as Celer was rather laggy, it could be that everyone is rushing to complete the task.

If you can’t load your balances, I would suggest that you try again another time.

Step #2: Bridge MATIC from Polygon to Linea on Connext

This was the easiest and most straightforward task of all.

First, you’ll need to get testnet MATIC from the faucet.

HvJH4q6hrVcNwDMFg f5

After that, you can bridge it over to Connext.

wUPrW9cK keoc5DwXD07F

You can bridge you MATIC over, but don’t forget to leave some behind to pay for gas fees.

Do you find it overwhelming to track all of the different airdrops that are available?

I’ve created an airdrop tracker of all the different networks and projects that I’m keeping an eye on,

image 33

and you can gain access to it by signing up for my Substack newsletter! The link to this Notion site will be included in the welcome email.

Step #3: Bridge USDC, DAI, HOP and gETH from Goerli to Linea on Hop Exchange

If you need help with getting Goerli ETH, check out my guide here.

Once you have these tokens, you can bridge them over to Linea using Hop Exchange.

ZUFmAZCwjkkDSRiGpFv6y

For DAI and HOP, you can claim them via Hop’s faucet.

image

However, for USDC, you’ll need to get them from the Linea faucet.

image 1

Alternatively, you can get USDC from this other faucet, but don’t forget to select the ETH network!

image 6

Step #4: Bridge TUSD and EUROe from Avalanche Fuji to Linea on Multichain

Similar to USDC on Goerli, you will need to use the Linea faucet to claim TUSD.

image 3

This is done by locking up some AVAX tokens, which you can get here.

image 2

For EUROe, you can use the same faucet, and you’ll just need to change the token.

image 4

Once you have both tokens, you can bridge them to Linea via Multichain.

image 5

Each transaction will cost some AVAX as gas fees.

Step #5: Bridge USDT and UNI from Goerli to Linea on Jumper

This is a brand new task, and you’ll need to get USDT and UNI from the faucet on Hop Exchange.

image 10

The cost to claim these testnet tokens can be extremely high, so you’ll need quite a bit of Goerli ETH.

After that, you can head to Jumper Exchange to bridge your funds to Linea.

image 11

The network is super unstable and it took me a really long while before I could perform this bridging transaction.

Conclusion

This has got to be one of the most confusing campaigns ever, as the steps aren’t clear enough. I spent a long time figuring out how to get these testnet tokens before being able to perform the transactions!

Once you have completed all of these tasks, check out my guide on other tasks you can perform to get the Linea airdrop here.


undraw pcsocial 16rw

Do you like the content on this blog?

To receive the latest updates from my blog and crypto in general, you can follow me on Telegram, YouTube and Twitter.

Are you passionate about personal finance and want to earn some flexible income?

Airdrops Crypto

Revealing ALL 25 Actions To Get The LayerZero Airdrop

The latest funding round brought LayerZero’s valuation to $3 billion, and the potential airdrop could be really huge for this cross-chain messaging protocol.

Here are all of the different decentralised applications that use LayerZero, and how you can interact with them. (P.S. I’ll be splitting them up into the different categories that they fall into)

Before you start

Here are some tips that I would recommend as you are using real-world money to try out these applications:

  1. Get a non-custodial wallet like Metamask
  2. Send both stablecoins and the native tokens of ≥ 2 networks to Metamask

I would highly recommend using both the Polygon and Avalanche networks, as the fees are the cheapest compared to the others like Optimism, Arbitrum or the Ethereum mainnet.

Category #1: Bridges

With cross-chain functionality being the main feature of LayerZero, quite a few bridges utilises this protocol.

The main platform is Stargate Finance, where you can transfer tokens across 8 different EVM-compatible networks.

image 94

You are able to add your tokens into the pools to earn some yields, as well as stake STG.

Staking STG is useful as you can vote for proposals that are raised on the Stargate DAO.

image 95

Other bridges include:

image 96
  • The bridge on Trader Joe (you can only bridge JOE between Avalanche, BNB Smart Chain or Arbitrum)
image 97
  • The bridge on Harmony One (bridging tokens from ETH or BSC to ONE)
image 98
  • The bridge on Swimmer (bridging between Swimmer and Avalanche)
image 99
image 100
image 101

If you are looking to add liquidity to one of the pools, I would suggest doing it for the Goerli testnet.

You will need to add both Goerli ETH and Mainnet ETH (METH), and you can copy the contract address from Goerli Etherscan.

image 102

After that, you can swap Goerli ETH to METH on Uniswap (don’t forget to switch to the Goerli testnet!)

image 110
  • Bridge on Angle (Bridging agEUR across different networks)
image 103
  • BTC Bridge (bridging LayerZero’s BTC.B across different EVM-compatible networks)
image 105
  • USDC Bridge (currently deprecated until mainnet launch)
image 104
  • Altitude DeFi (KIV, may be launching soon)
image 108

Category #2: Trading Platforms

image 106
image 107
image 109
image 111

Category #3: Lending Platforms

image 112
  • Bridge tokens on Tapioca (KIV, next round of beta testing may be soon)
image 113

Category #4: Domain Names

image 114

However, this is done on the Ethereum mainnet, so gas fees can be quite high!

Category #5: NFT Marketplaces

  • Purchase NFTs on Omni-X (testnet)
  • Mint NFTs on Omnisea (however, it seems to only be on the Ethereum mainnet…)
image 115
  • Mint NFTs on Holograph (can be done on Polygon)
image 116

After creating a collection, you can bridge it to the Avalanche network

image 117
  • Optional: Purchase a Gh0stly Gh0sts NFT (fees are too high on Ethereum so I’m skipping this)
image 119

Category #6: Complete Layer3 Quests

So far, there are 3 quests that you can complete that are associated with LayerZero:

  1. Radiant Capital (Quests 1 and 2)
  2. Stargate Finance (Optimism network)
image 118

Checking your LayerZero transactions

You can check all of the transactions that you’ve performed on this Dune dashboard.

image 120

However, it may take a while to load, and you can enter your wallet address afterwards to see your transactions.

Conclusion

There are so many different methods to qualify for the LayerZero airdrop, and it may be best to do as many as you can afford.

You can check out my video here for all of the actions that I took:


undraw pcsocial 16rw

Do you like the content on this blog?

To receive the latest updates from my blog and crypto in general, you can follow me on Telegram, YouTube and Twitter.

Are you passionate about personal finance and want to earn some flexible income?

Airdrops Crypto

6 Steps To Qualify For Mantle’s Airdrop (And Get $BIT Tokens)

Mantle is a Layer-2 built on Ethereum that was initiated by BitDAO.

Here are some of the steps you can take on its testnet to potentially get a $BIT token airdrop:

Step #1: Get BIT tokens on Goerli

There are 2 ways to get BIT tokens on the Goerli testnet:

the #faucet channel on the Mantle’s Discord,

image 85

and the faucet on the Mantle site

image 86

You will receive BIT tokens on the Ethereum mainnet.

Step #2: Complete tasks on Mantle’s Zealy questboard

There are multiple tasks that you can complete on Mantle’s Zealy questboard.

image 87

This includes some simple tasks like following their socials, and other on-chain tasks.

Step #3: Bridge funds to the Mantle testnet

Now that you have BIT tokens on Goerli, you can bridge it to Mantle to be used as gas fees.

image 88

You will need some Goerli ETH to pay for gas fees on the Goerli network for this bridging transaction.

If you do not have enough Goerli ETH, you can check out my guide here.

Step #4: Get roles on Mantle’s Guild

You can access Mantle’s Guild and get some of the roles for Discord.

image 89

However, majority of these roles require you to purchase the BIT token on the Ethereum mainnet, where the gas fees can be extremely high!

Step #5: Mint your own token on DexPad

You can create a token on the Mantle network using DexPad.

image 90

Step #6: Swap tokens on MantleSwap

MantleSwap is the first decentralised exchange on the Mantle network, and you can use this to swap tokens,

image 92

and add liquidity.

image 93

Moreover, ManteSwap has a Zealy questboard that you can join as well.

image 91

Conclusion

There are other testnets that you could potentially interact with and qualify for an airdrop, including the likes of:


undraw pcsocial 16rw

Do you like the content on this blog?

To receive the latest updates from my blog and crypto in general, you can follow me on Telegram, YouTube and Twitter.

Are you passionate about personal finance and want to earn some flexible income?

Airdrops Crypto

9 Steps To Qualify For Scroll’s Rumoured Airdrop

Last updated on May 5th, 2023

Scroll is another zkEVM like Linea, zkSync, or Taiko, and here are the steps I’ve taken to get this airdrop:

Step #1: Bridge funds to Scroll

If you have Goerli ETH on the Ethereum Goerli testnet, you can bridge your funds over to the Scroll network.

image 73

Check out my guide here on the best ways to get Goerli ETH.

Step #2: Swap tokens on Uniswap

Uniswap is deployed on the Scroll testnet, and you can wrap your ETH to WETH.

image 74

To use the pool feature, you will need to create your own token to add some liquidity.

Step #3: Deploy a smart contract on Scroll

This may sound rather complicated, but it’s pretty straightforward!

You can create some parameters on OpenZeppelin,

image 39

and then deploy the smart contract using the Remix IDE.

image 40

The most important step is to ensure that you are connected to the Scroll testnet when you are deploying the smart contract.

My step-by-step guide is in the video below:

Step #4: Add liquidity to Uniswap using your new token

Once you have created your new token, you can create a liquidity pool with ETH.

image 75

Do you find it overwhelming to track all of the different airdrops that are available?

I’ve created an airdrop tracker of all the different networks and projects that I’m keeping an eye on,

image 33

and you can gain access to it by signing up for my Substack newsletter! The link to this Notion site will be included in the welcome email.

Step #5: Swap tokens and add liquidity on DEXes

Similar to Uniswap, you can perform the same steps on SyncSwap.

image 76

Don’t forget to make sure that you’re on the Scroll testnet!

You can also do the same for Zada Finance

image 82

Step #6: Play some games on Scroll

There are a few games that you can play on the Scroll network, including an on-chain tic-tac-toe,

image 77

and these 2 games (1 | 2).

image 78

Step #7: Bridge your funds to other networks

You can use Orbiter Finance to bridge your ETH tokens from Base to other Layer 2s, or even back to the Goerli testnet.

image 83

Orbiter Finance will charge some fees for this transfer, so it’ll be best not to bridge all of your funds!

This platform may have an airdrop too, which you can find out more here.

Another platform you can use is Symbiosis, where you can swap tokens on Scroll to the testnets on Goerli, BSC, Polygon or Avalanche.

image 84

You can add your funds to the pools as well, and even Farm your tokens.

Step #8: Deposit and borrow assets on Aave

Aave is on the Scroll network, and you will need to enable the testnet mode by selecting the option (top right hand corner of the Aave DApp).

image 8

This will allow you to deposit your ETH and then borrow some assets.

image 9

Step #9: Join Scroll’s Discord and Guild

To get a role on Scroll, you can join their Guild and Discord.

image 79

undraw pcsocial 16rw

Do you like the content on this blog?

To receive the latest updates from my blog and crypto in general, you can follow me on Telegram, YouTube and Twitter.

Are you passionate about personal finance and want to earn some flexible income?

Airdrops Crypto

13 Steps To Qualify For The (Rumoured) Base Airdrop

Last updated on May 17th, 2023

Base has constantly denied that they’ll be releasing a token,

SCR 20230409 jias

but this was the case for both Arbitrum and Optimism before they released their token too.

SCR 20230409 jitn

Here are some steps you can do to qualify for the airdrop in the future.

Step #1: Bridge to the Base network from Ethereum Goerli

To perform transactions on this network, you will need to bridge your funds over from the Goerli testnet to the Base testnet.

image 34

If you’re struggling to get Goerli Ethereum, you can check out my guide here.

This will require some gas fees as well, so you may not want to bridge all of your Goerli Ethereum over to Base.

Do you find it overwhelming to track all of the different airdrops that are available?

I’ve created an airdrop tracker of all the different networks and projects that I’m keeping an eye on,

image 33

and you can gain access to it by signing up for my Substack newsletter! The link to this Notion site will be included in the welcome email.

Step #2: Complete the Layer3 quest

After you have bridged your funds over to Base, this will help you to fulfil all of the requirements for this Layer3 quest.

image 35

This could be another criterion for the airdrop.

Step #3: Mint the ‘Base, Introduced’ NFT

To commemorate the launch of Base, a ‘Base, Introduced’ NFT is available to be minted.

image 36

However, this will be done on the Ethereum mainnet, which means that the gas fees are very expensive.

I’ve personally chosen not to mint this NFT due to the high fees.

Step #4: Bridge ETH on Base to other networks

You can use Orbiter Finance to bridge your ETH tokens from Base to other Layer 2s, or even back to the Goerli testnet.

image 37

Orbiter Finance will charge some fees for this transfer, so it’ll be best not to bridge all of your funds!

Step #5: Play the Cat Attack game on Base

ThirdWeb has launched a Cat Attack game on Base,

image 38

and you can mint a Cat NFT, while attacking other players’ NFTs.

This will help you to perform multiple transactions on the Base network.

Step #6: Deploy a smart contract on Base

While this may seem quite technical, it’s actually not the case!

You can create some parameters on OpenZeppelin,

image 39

and then deploy the smart contract using the Remix IDE.

image 40

The most important step is to ensure that you are connected to the Base Goerli network when you are deploying the smart contract.

If you’re feeling overwhelmed, you can check out my video for more information about this:

Step #7: Use the Axelar Bridge

Axelar is another cross-chain bridge like Orbiter Finance, and you can bridge testnet aUSDC from Base to another network.

However, you will need to get your aUSDC from the faucet channel on Axelar’s Discord.

image 41

You can use the !faucet command with your wallet address to get these funds.

After that, you can use the bridge on Axelar to bridge aUSDC to another network like Arbitrum.

image 42

You can try this out with any other EVM-compatible networks like Polygon, Avalanche or Optimism, but don’t forget to have enough gas fees on that network if you want to bridge you funds back!

Step #8: Swap on Cap

Cap is a perpetual exchange on Base, where you can long or short a few coins, and even try out leverage up to 5x.

I entered both a long and short position on ADA using ETH:

image 44

However, the gas fees can be quite high for these transactions, at about 0.006 ETH.

image 43

There are also pools where you can deposit your funds.

image 45

There’s a Stake section, but you are only able to stake the CAP token, and I don’t think it’s possible to buy this token on Base yet.

Step #9: Woo Network

Woo Network is another protocol that has launched on Base, and you can swap ETH for USDC or BTC.

image 46

It’s currently not possible to stake tokens under the Earn tab,

image 47

so it’ll be something to keep an eye out for in the future.

Step #10 CBSwap

Similar to Cap, CBSwap is another decentralised exchange where you can swap tokens.

Don’t forget to switch your network to Base!

image 48

You can swap ETH to either USDC, WETH or GOVCB (governance token of CBSwap).

After swapping, you can add liquidity to these pools.

image 49

Step #11: Swap on Dackie Swap

Similar to CBSwap, you can perform some actions on this DEX.

You can claim tokens from the faucet after retweeting a tweet,

image 121

and swap some tokens on the platform.

image 122

You can provide some liquidity to these tokens too.

image 123

Step #12: Create a multi-sig wallet on Safe

On the Safe website, you can create a multi-sig wallet with other wallet addresses.

Don’t forget to change the network to the Base network when you’re creating the wallet!

image 7

Step #13: Perform a multi-token swap on Odos

You can swap multiple tokens into 1 token with this platform.

image 12

Don’t forget to switch your network to the Base network!

Step #14: Interact with Neptune Mutual

You can test out some of the features on the Neptune Mutual platform.

image 13

Conclusion

All of this is merely speculation, and hopefully, Base will indeed surprise us and give us a token airdrop!

There are other Layer-2 networks that currently have the potential for an airdrop too, and you can check out my guides for Taiko and the ConsenSys zkEVM (Linea).


undraw pcsocial 16rw

Do you like the content on this blog?

To receive the latest updates from my blog and crypto in general, you can follow me on Telegram, YouTube and Twitter.

Are you passionate about personal finance and want to earn some flexible income?

Airdrops Crypto

Qualify For The SpaceFi And SyncSwap Airdrops (With This Guide)

With the launch of the zkSync Era mainnet, there are some projects that are currently live, with heavy rumours that they’ll be releasing a token soon.

2 of these projects are SpaceFi and SyncSwap, and here’s how you can qualify for them.

Both of these tasks will be ending in April, so it’s best to do them asap!

If you prefer a video guide, you can check it out here:

SpaceFi Airdrop

SpaceFi has an On-Chain Achievement Token on Galxe that you can claim,

image 30

and the instructions can be found on their Gleam page.

This includes:

  1. Adding liquidity into SpaceFi pools (either ETH/USDC or SPACE/ETH)
  2. Staking your LP tokens to earn yield
  3. Completing some social tasks on Gleam

Once you have completed all of these tasks, you can enter your wallet address in the last section, and wait for your address to be approved on Galxe.

This will enable you to mint the Galxe OAT.

Other steps will include:

SyncSwap Airdrop

SyncSwap is another decentralised exchange on zkSync Era, and I did some swaps while trying to qualify for the zkSync airdrop.

The tasks to get SyncSwap’s OAT is somewhat similar to SpaceFi,

image 31

and you’ll need to:

  1. Perform 2 swaps on SyncSwap
  2. Add liquidity into SyncSwap’s pools (I did it for ETH/USDC too)

This will allow you to claim SyncSwap’s OAT, which you can then use to get a Discord role in their guild.

image 32

Conclusion

Besides farming for these 2 airdrops, you can carry out more transactions on the zkSync network to qualify for their airdrop in the future, and you can find out more in my guide here.


undraw pcsocial 16rw

Do you like the content on this blog?

To receive the latest updates from my blog and crypto in general, you can follow me on Telegram, YouTube and Twitter.

Are you passionate about personal finance and want to earn some flexible income?

Airdrops Crypto

7 Steps To Qualify For The zkSync Airdrop

There have been rumours that zkSync will be launching its token in the coming year,

and here are some steps you can do to prepare yourself for it.

If you prefer a video guide, you can check it out here:

Step #1: Bridge funds to zkSync Era

If you have funds on the Ethereum Mainnet, you can bridge them over using zkSync’s official bridge.

image 6

However, when I tried this, the gas fees that I needed to pay were around $5, and this was really expensive.

There are other cheaper ways especially if you have ETH on other networks like Polygon or Arbitrum, and you can check out my guide here for more details.

ETH is needed on this network as it is used to pay for gas fees when you are making any transactions on zkSync Era. As such, it will be good to bridge about $50 worth of ETH to interact with applications on the network.

Step #2: View available projects that are live on zkSync Era

You can access the full list of decentralised applications (DApps) that are live on zkSync Era via this link, and then filter them based on the ‘Live on Era’ tab.

image 16

This will show you all of the DApps that you can interact with on zkSync Era.

Step #3: Perform swaps on DEXes

There are tons of decentralised exchanges on zkSync Era, including SyncSwap,

image 17

Mute,

image 19

and SpaceFi.

image 18

The concept is similar for all of these platforms, where you can swap your ETH to another currency (I usually swap my ETH to USDC and back),

image 21

and add liquidity to the various pools to earn some yields.

image 22

Each of these transactions will require you to pay quite a hefty amount in gas fees, but around 75% of it may be refunded.

As such, you may want to leave enough ETH in your wallet to pay for all of these gas fees.

Step #4: Purchase a zkSync Named Service Domain

If you’re familiar with Unstoppable Domains, Space ID or ENS, you can purchase a domain on zkSync Era too.

image 23

It costs around $5 USD per year, and you’ll need to factor in the gas fees for the transaction.

Step #5: Mint or purchase NFTs

There are 2 main NFT marketplaces available on zkSync Era, including Mint Square,

image 24

and Kreatorland.

image 25

It’ll be good to buy and list some NFTs on both of these marketplaces, as you try to interact with as many smart contracts as possible.

Step #6: Bridge your funds to other networks

You can use bridges like Orbiter Finance,

image 27

or Multichain,

image 26

to bridge your funds from zkSync Era to another Layer 2, or the Ethereum mainnet itself.

Orbiter Finance is rumoured to have an airdrop too, and you can find out more about it here.

Step #7: Try out applications on zkSync Lite

Arbitrum’s airdrop was awarded to wallets that used the Arbitrum Nova network, which is separate from the main Arbitrum One network.

image 28

zkSync has 2 different networks, zkSync Lite (version 1) and zkSync Era (version 2).

It will be good to use decentralised applications on zkSync Lite and interact with smart contracts there as well.

The main platform on zkSync Lite is ZigZag Exchange,

image 29

and you can keep an eye out for other projects that have launched on this network too.

Conclusion

The gas fees on zkSync Era are still quite high now, and it was mentioned that once there are more users on the platform, the gas fees will be lower.

This is because the cost of producing zero-knowledge proofs are quite high, and having more transactions will reduce the costs.

In the meantime, it’ll be good to keep an eye out on the fees and try to transact on these platforms when activity is much higher!


undraw pcsocial 16rw

Do you like the content on this blog?

To receive the latest updates from my blog and crypto in general, you can follow me on Telegram, YouTube and Twitter.

Are you passionate about personal finance and want to earn some flexible income?

Airdrops Crypto

5 Steps To Qualify For Taiko’s Airdrop

Taiko is yet another zkEVM, which they even managed to get a shoutout from Vitalik himself!

Their mainnet is launching in 2024, and here are some steps you can do to potentially qualify for the airdrop.

If you prefer a video guide, you can check it out here:

Step #1: Get Sepolia Ethereum

Taiko requires you to bridge ETH from the Sepolia testnet, instead of the usual Goerli testnet.

You can get your Sepolia ETH from this faucet, which gives you about 1 Sepolia ETH/day.

image 9

If you are looking to get Goerli ETH, you can check out my guide here.

Step #2: Bridge Sepolia ETH To Taiko

The next step is to go to the Taiko Bridge and send your ETH to this testnet.

image 10

Before doing so, you can use the faucet to claim BLL and HORSE tokens.

image 11

The bridging fees can be quite expensive between 0.04 – 0.14 ETH, so it’ll be best to ensure you have enough ETH to process these transactions.

It may also take a while before the ETH gets sent over to Taiko, so do this in advance before you want to try out the different platforms!

Step #3: Swap on Taiko

You can use the Uniswap fork on the Taiko network to swap your ETH tokens to either BLL or HORSE.

image 12

Moreover, you can add liquidity to the ETH/HORSE or ETH/BLL pools.

image 13

You can try out these actions once every week, where you can swap, and both add and remove liquidity.

Step #4: Briding using Orbiter Finance

You can use the testnet version of Orbiter Finance to bridge your funds on Taiko to the testnets of other Layer-2s, including Linea, Scroll or even back to Goerli.

image 14

This platform can help you to transfer your ETH between testnets, especially if you are trying out for the airdrops on all of them.

Orbiter Finance may be rumoured to have an airdrop too, which you can find out more in my guide here.

Step #5: Collect Taiko’s entries on Mirror

Taiko has a Mirror blog, and you can collect an entry for every blog post they publish.

image 15

However, the public mint is only limited to the first 500 wallets, so you may want to receive email notifications from them and try to be the first 500 to mint it.

Conclusion

Nothing is confirmed as of yet, but we can hope that Taiko releases a token when they launch their mainnet in 2024.


undraw pcsocial 16rw

Do you like the content on this blog?

To receive the latest updates from my blog and crypto in general, you can follow me on Telegram, YouTube and Twitter.

Are you passionate about personal finance and want to earn some flexible income?